Publié le :
03/31/2017 09:08:51
Catégories :
Radiator
, Videos
To replace it, you need :
A pliers
A pliers crescent wrench
A hexagon key
A PTFE tape
A cup
A purge key
A wipe
Steps to be followed:
First, drain the heating circuit
Unscrew slowly the conical bolting between the radiator and the faucet, to let the water run.
Unscrew and remove the water faucet and block the coupling with another pliers.
Check if the conical bolting is compatible with the new faucet. If everything is ok you don’t have to change the bolting. You may use a hexagon key or a nipple key according to your model
Install the new conical bolting. If it is self-sealing, you don’t have to put PTFE tape
Remove the old seal on the pipe coupling
Put the tape and turn it clockwise
Screw the new head manually, then tighten with the pliers. Make sure the fitting is facing the conical bolting.
You can install one thermostatic head to realize savings
Fill your heating circuit then drain the radiator
Where can you find the Radiator valves and fittings products?