Collective thermostatic supply mixer ST M3/4" - DIFF

Adjustment range 32-45°C Regulation: the November 30 2005 decree precisely defines the means of control through minimum temperatures to limit the risk associated with the development of legionella and maximum temperatures to limit the risk of scalding Therefore the November 30 2005 decree involves the installation of thermostatic mixing devices at the hot water production outlet to lower the temperature of distributed domestic hot water (for example from 65°C to 55°C) and upstream, as close as possible to supply points to limit any risk of scalding (50°C max) Collective mixer outside the loop: the ST model (for the supply of the drawing off points) It will provide a regulated mixed water temperature therefore satisfying the regulation according to the 30/11/05 decree Caution: the volume of water between the supply point and the collective mixer shall not exceed 3 litres (30/11/05 decree) If there is no loopback, the SE or ST models can be installed indifferently Technical information: Service pressure 2 to 4b Maximum pressure 10b T° max hot water 85°C Possibility of changing the direction of the mixed water outlet Anti-scalding safety cut-off of mixed water Chrome-plated solid brass CW617N ST: with cap and blue ring SE: with cap and red ring For reminder: the temperature of the storage tank must be at least 55°C in order to limit the risks of legionella The mixer is mounted on the network after the tank to avoid scalding of users Product of the boiler environment, climatic engineering fittings, reducer