Electrical contact cleaner - ISOCLEAR

Electrical contact cleaner is a cleaning solvent for electrical contacts. It does not contain chlorinated solvents and, after evaporation, leaves a thin protective film against oxidation. This complex of organic solvents is free of aromatic solvents (benzene, toluene, xylene) and halogen solvents (DI, tri or perchloroethylene). Due to its regular evaporation rate, it does not mark metal surfaces. Being neutral, it does not alter plastics and has very little effect on rubbers. It has good affinity with oils (animal, vegetable, mineral) even when they are oxidised (soot). Electrical contact cleaner perfectly cleans electric motor rotors. In addition, it has a dehumidifying function thanks to its hydrophobic quality. The cleaner does not alter winding varnishes or printed circuit boards. ADVANTAGES: Multi-position use, protects against oxidation, chlorinated solvent-free, non-flammable propellant. USE: Wear appropriate PPE / Switch off the electrical equipment to be treated / Spray approximately 20 cm from the parts to be treated / Indoors, work in a well-ventilated area / Users must ensure that the solvents have completely evaporated before putting the cleaned equipment back into service / The aerosol can be used in both `upside down? and `right side up? positions / Its extension tube allows you to reach hard-to-reach areas. Safety information: For professional use only. Do not use for any purpose other than that for which the product is intended. Pressurised container: may burst if heated. Wear personal protective equipment, gloves, goggles and suitable clothing. For more information, consult the SDS.