Concentrated heat transfer antifreeze ACS1 - Sanitary and solar - ISOCLEAR

ISOCLEAR ACS1 is a concentrated monopropylene glycol-based heat transfer fluid. It provides effective protection against freezing, foaming and metal corrosion. It is particularly recommended for sanitary and solar installations. It contains an organic inhibitor. This product is bacteriostatic. ADVANTAGES: 2 functions in 1: Antifreeze + Corrosion inhibitor Recommended for sanitary and solar installations, Protection against freezing and metal corrosion Free from BORAX, NITRATE and PHOSPHATE. USE and DOSAGE: Ensure that the installation is thoroughly cleaned and rinsed before injecting the product. Before use, ACS1 must be diluted with preferably softened water in a specific proportion (by volume) relative to the freezing point. For a freezing point of -12°C: 28% ACS1 + 72% water For a freezing point of -16°C: 33% ACS1 + 67% water For a freezing point of -19°C: 37% ACS1 + 63% water For a freezing point of -25°C: 42% ACS1 + 58% water For a freezing point of -31°C: 47% ACS1 + 53% water The minimum dilution to guarantee the inhibitor's effectiveness is 30% ACS1. It is recommended that the mixture be prepared outside the installation. Safety information: Antifreeze must be used with caution. Ensure that you choose the right antifreeze for your system and follow the recommended dosages. Incorrect use may result in damage to the installations, risk of leaks or reduced performance of the heating system. For professional use only. Do not use for any purpose other than that for which the product is intended. Keep the container tightly closed. Store only in the original container, away from heat, in a dry, cool and well-ventilated place. Wear personal protective equipment, gloves, goggles and appropriate clothing.

Given the nature of this product, it is recommended to have it installed by a professional.