Description
Designed to feel, clean and empty solar systems
Motor 230V
Flow rate 2400l/h
Water lift 40m
Tank capacity 20L
Weight 25kg
Sizes : 47x29x62,5cm
It must be used under following conditions:
Maxi pressure working : 10 bars
Suction till : 7m
Liquide temperature : from +0°C to 80°C
Power variation : ± 5%
Pump has to work in its nominal level operating range
Protection : IP44
Maxi acoustic : >70 dB Equipped :
Very large feeling plug
One 3 way valve
Easy to pump directly from a can.
Comments : The pump is designed to use at last some fat heat exchanger coolant (feeling process). If the pump is only used with water (cleaning process), then without any feeling process, don't forget to leave some fat product to prevent it from rusting.
We recommend to use POILISIL.
Conforms CEE 89/392-73/23
Pump is not guaranted if it is used with acid
Given the nature of this product, it is recommended to have it installed by a professional.