MILLENIUM 40G3R bio fuel oil burner with heater - RIELLO : 20181380

RIELLO 40 Millenium burner with heater. Easy to adjust and compact enough to be installed quickly, a cylinder is used to manage the air flap (opening and closing of the air flap). The Riello Millenium 40 G3R burner operates at one speed.
The Millenium 40G3R with heater is made of few parts and is low noise with easy maintenance.
It has IP40 protection, it satisfies CE standards in accordance with the EEC guidelines
ADVANTAGES:



Electrical connection using a 7-pin European socket






Burner cap with acoustic protection to further reduce the noise level






Includes a fuel oil heater






Minimal footprint






Direct closing of the air flap when the cylinder stops



DIMENSIONS:



Burner flame tube: diameter 89 mm x length 110mm






Burner excluding flame tube: 259 x 222 x 203



The burner should be maintained periodically by a professional heating technician. Over time, the burner becomes dirty and its performance drops. The fuel oil nozzle wears and parts of the Riello 40G3R burner wear out. The heating technician should then optimise the performances of the heating unit to prevent the burner from failing.
After switching off the burner power supply, the heating technician can perform several operations:



Check the condition of the fuel oil supply and return pipes at the burner, to see if there are any obstructed or blocked parts






Clean the suction line filter and the heating oil filter on the fuel oil pump






Clean the flame sensor






Check energy consumption and CO2






The amount of CO






The temperature of the smoke outlet from the stack






The smoke opacity index



Guarantee: 1 year for spare parts (excluding wear parts) provided that it is put into service and maintained by a qualified professional Product for heating, complete burner type Additional information: this product is sold in the boiler manufacturer's packaging, it has not been modified in any way.

Safety Information :
To protect yourself against electrical hazards, be sure to disconnect the load from the power supply before working on it. If in doubt, don't risk a faulty installation: ask a qualified electrician for advice.

Given the nature of this product, it is recommended to have it installed by a professional.